ZPIO Wireless repeater of analogue and discrete signals

Wireless repeater of analogue and discrete signals

ZPIO eliminates cable connections and simplify your installations.

State on the inputs is copied automatically on the outputs of the remote module.

ZPIO replace cable connecting the signal transmitter and the receiver by reliable wireless connection. Data delivery between ZPIO modules is guaranteed by the applied protocol for transmission with confirmation, standard IEEE 802.15.4 and ZigBee.

ZPIO allow to control remote analogue and discrete outputs and/
or to get information about the discrete and analogue inputs.


 Get over rivers, roads, railways and other obstacles without
need of any construction works

Easy and fast installation

Reliable work inside and outside

Low maintenance costs due to lack of cables


Up to 8 I/O, optically isolated
• Peer-to-Peer mode of communication between two ZPIO modules
• Range up 4 km at line-of-sight condition
• Frequency—2.400 to 2.485 GHz
• RF Data rate – 250 000 bps
• Modulation – O-QPSK, DSSS
• Max. output power 60 mW (100 mW EIRP), software adjustment
• IP65 protection against moisture and dust
• Wide temperature range:–200C ÷ +600C
• Power supply 220 VAC or 24 VDC, built-in lightning protection
• Free configuration software.

Ordering code:
ZPIO - A BC-D, where:

ZPIO - Wireless repeater for I/ O signals (parrot) under standard IEEE802.15.4, RF data rate 250Kbps,
range 2400-2485MHz, O-QPSK modulation and DSSS spread spectrum


1 - 220VAC
2 - 24VDC
3 - 12VDC


0 - Internal omnidirectional whip 1.5 dBi - up to 200m
1 - External omnidirectional whip 5 dBi - up to 500m
2 - Antenna connector type N(f) - up to 4 km


11 - Four ÷ eight inputs selectable for dry contact or DC key—common "-". Up to four outputs - common "-",
open collector.

12 - Up to four inputs for dry contact or DC key—common "-". Four ÷ eight outputs selectable—common "-",
open collector.

13 - Two inputs 4-20mA, 10bits, optical insulation between inputs and internal bus. Two outputs 4-
20mA, 10bits, optically non-insulated, 2-wire connection, passive.

14 - Two DI for dry contact and two relay outputs.

21 - Five general DI for dry contact or DC key. Two alarm inputs. One DI for accumulator voltage.

22 - Three general DI for dry contact or DC key. Two alarm inputs. One DI for accumulator voltage. Bypassed
one internal input and one internal output for radio link control.



<< back

What is RSS?
RSS (Really Simple Syndication) is an XML format designed for sharing web content like news headlines. An RSS service (also known as an RSS channel) consists of a list of items, each of which contains a headline, description, and a link to a web page.
To use RSS, you will need a special RSS news reader or aggregator that will allow you to collect and display RSS service. RSS news readers allow you to view the service you select all together in the same place and, by automatically retrieving updates, stay current with new content soon after it is published.

Subscribe for this channel